If you don't get an e-mail with your access data please make sure that you have already registered with us. As soon as you are registered, you can login with your e-mail address and your password.
In case you still have problems loging in please turn to us by e-mail: firstname.lastname@example.org
lOne of our line of Tubular Electrodes, the PES Testicle Tubular is designed to deliver Erotic Electro Stimulation to a specific erogenous zone. Constructed out of our conductive silicone elastomer, Electro-FlexTM, this Electrode is designed to conform to the soft tissue mass of the scrotal sack while at the same time encapsulating each testicle separately.
The pressure applied by the Testicle Tubular when adjusted properly gives precision focusing of the Erotic Electro Stimulation (EES) to your most sensitive areas, maximizing its effects.
This Electrode is not only adjustable due to its construction but it can also be trimmed to give an even more personalized anatomic fit.
PES Low Profile Leads are sold separately from the Electrodes. Electrode will not work without a power source like an e-stim or TENS unit and at least one other Electrode.
Important Safety Notes:
Due to its design, the Testicle Tubular Electrode should only be used with our low profile lead technology. Use with other leads may cause damage to the Electrode or it may not function properly. As this is a tubular Electrode, the entire surface is conductive. It is recommended to wear latex gloves to help prevent accidental above-the- waist contact. This is only necessary when the power source is turned on.
This is an adjustable Electrode. It can be trimmed to provide a better fit. In order to trim this Electrode, remove the low profile connection with a pair of pliers, then remove the bulb, cut off the excess conductive tubing. Replace the bulb then insert the low profile connection. Make sure to leave enough tubing to properly apply the Electrode. DO NOT trim unless you have first assured that it is necessary. It is recommended to shave the scrotum in order to ensure proper contact and reduce the possibility of hot spots.
These products are for adult novelty use only.
Safety, Lubrication, and Cleaning:
This Electrode can be cleansed in a 10% bleach 90% water solution mixed with a few drops of dishwashing liquid or anti- bacterial soap. Make sure to rinse the Electrode thoroughly and allow it to dry completely before use. It can also be sprayed with Isopropyl Alcohol. Do not soak.
PES recommends the use of a lubricant with all PES Electrodes. Lubricant not only lubricates but also decreases the possibility of hot spots. We recommend PES ElectroLube (Item #75). You can also use Olive Oil. Water-based lubricants can be used in the event that you do not have either ElectroLube or Olive Oil. Make sure the lubricant you are using is a water-based lubricant with no silicone ingredients. Silicone is an insulator and can reduce conductivity. Silicone-based lubricants, when used with any silicone product such as Electro-FlexTM, will bond to the product and undermine the composition of the product. Not only will silicone lubricants affect the conductivity of the Electrode, but it may eventually lose all conductive properties. This will void any warranty, expressed or implied, on the Electro-FlexTM product line.
We are happy to inform you about a price change of this product respectively when it hits the price you want to purchase.